Pyroclastic surges and flows from the 8–10 May 1997 explosive eruption of Bezymianny volcano, Kamchatka, Russia

The 8-10 May 1997 eruption of Bezymianny volcano began with extrusion of a crystallized plug from the vent in the upper part of the dome. Progressive gravitational collapses of the plug caused decompression of highly crystalline magma in the upper conduit, leading at 13:12 local time on 9 May to a powerful, vertical Vulcanian explosion. The dense pyroclastic mixture collapsed in boil-over style to generate a pyroclastic surge which was focused toward the southeast by the steep-walled, 1956 horseshoe-shaped crater. This surge, with a temperature <200 °C, covered an elliptical area >30 km² with deposits as much as 30 cm thick and extending 7 km from the vent. The surge deposits comprised massive to vaguely laminated, gravelly sand (Md -1.2 to 3.7J sorting 1.2 to 3J) of poorly vesiculated andesite (mean density 1.82 g cm^-3; vesicularity 30 vol%; SiO₂ content ~58.0 wt%). The deposits, with a volume of 5-15᎒⁶ m³, became finer grained and better sorted with distance; the maximal diameter of juvenile clasts decreased from 46 to 4 cm. The transport and deposition of the surge over a snowy landscape generated extensive lahars which traveled >30 km. Immediately following the surge, semi-vesiculated block-and-ash flows were emplaced as far as 4.7 km from the vent. Over time the juvenile lava in clasts of these flows became progressively less crystallized, apparently more silicic (59.0 to 59.9 wt% SiO₂) and more vesiculated (density 1.64 to 1.12 g cm^-3; vesicularity 37 to 57 vol%). At this stage the eruption showed transitional behavior, with mass divided between collapsing fountain and buoyant column. The youngest pumice-and-ash flows were accompanied by a sustained sub-Plinian eruption column ~14 km high, from which platy fallout clasts were deposited (~59.7% SiO₂; density 1.09 g cm^-3; vesicularity 58 vol%). The explosive activity lasted about 37 min and produced a total of ~0.026 km³ dense rock equivalent of magma, with an average discharge of ~1.2᎒⁴ m³ s^-1. A lava flow ~200 m long terminated the eruption. The evolutionary succession of different eruptive styles during the explosive eruption was caused by vertical gradients in crystallization and volatile content of the conduit magma, which produced significant changes in the properties of the erupting mixture.     

Determination of cosmology and evolution from K-band magnitude–redshift and number count observations

We determine cosmological and evolutionary parameters from the 3CR K -band Hubble diagram and K -band number counts, assuming that the galaxies in question undergo pure luminosity evolution. Separately the two data sets are highly degenerate with respect to choice of cosmological and evolutionary parameters, but in combination the degeneracy is resolved. Of models that either are flat or have  Ω_Λ=0  , the preferred ones are close to the canonical case  Ω_{cold  matter}=1  ,  Ω_Λ=0  , with luminosity evolution amounting to 1 mag brighter at   z =1  .     

Prediction of the thermodynamic properties of metal–arsenate and metal–arsenite aqueous complexes to high temperatures and pressures and some geological consequences

The standard thermodynamic properties at 25°C, 1 bar (ΔG _f^o, ΔH _f^o, S ^o, C _P^o, V ^o, ω) and the coefficients of the revised Helgeson–Kirkham–Flowers equations of state were evaluated for several aqueous complexes formed by dissolved metals and either arsenate or arsenite ions. The guidelines of Shock and Helgeson (Geochim Cosmochim Acta 52:2009–2036, 1988) and Sverjensky et al. (Geochim Cosmochim Acta 61:1359–1412, 1997) were followed and corroborated with alternative approaches, whenever possible. The SUPCRT92 computer code was used to generate the log K of the destruction reactions of these metal–arsenate and metal–arsenite aqueous complexes at pressures and temperatures required by the EQ3/6 software package, version 7.2b. Apart from the AlAsO₄^o and FeAsO₄^o complexes, our log K at 25°C, 1 bar are in fair agreement with those of Whiting (MS Thesis, Colorado School of Mines, Golden, CO, 1992). Moreover, the equilibrium constants evaluated in this study are in good to fair agreement with those determined experimentally for the Ca–dihydroarsenate and Ca–hydroarsenate complexes at 40°C (Mironov et al., Russ J Inorg Chem 40:1690, 1995) and for Fe(III)–hydroarsenate complex at 25°C (Raposo et al., J Sol Chem 35:79–94, 2006), whereas the disagreement with the log K measured for the Ca–arsenate complex at 40°C (Mironov et al., Russ J Inorg Chem 40:1690, 1995) might be due to uncertainties in this measured value. The implications of aqueous complexing between dissolved metals and arsenate/arsenite ions were investigated for seawater, high-temperature geothermal liquids and acid mine drainage and aqueous solutions deriving from mixing of acid mine waters and surface waters. Electronic Supplementary Material The online version of this article () contains supplementary material, which is available to authorized users.     

Halogen diffusion in a basaltic melt

The diffusion of the halogens fluorine, chlorine and bromine was measured in a hawaiitic melt from Mt. Etna at 500 MPa and 1.0 GPa, 1250 to 1450 °C at anhydrous conditions; the diffusion of F and Cl in the melt was also studied with about 3 wt% of dissolved water. Experiments were performed using the diffusion-couple technique in a piston cylinder. Most experiments were performed with only one halogen diffusing between the halogen-enriched and halogen-poor halves of the diffusion couple, but a few experiments with a mixture of halogens (F, Cl and Br) were also performed in order to investigate the possibility of interactions between the halogens during diffusion. Fluorine and chlorine diffusivity show a very similar behavior, slightly diverging at low temperature. Bromine diffusion is a factor of about 2-5 lower than the other halogens in this study. Diffusion coefficients for fluorine range between 2.3 × 10⁻¹¹ and 1.4 × 10⁻¹⁰ m² s⁻¹, for chlorine between 1.1 × 10⁻¹¹ and 1.3 × 10⁻¹⁰ and for bromine between 9.4 × 10⁻¹² and 6.8 × 10⁻¹¹ m² s⁻¹. No pressure effect was detected at the conditions investigated. In experiments involving mixed halogens, the diffusivities appear to decrease slightly (by a factor of ∼3), and are more uniform among the three elements. However, activation energies for diffusion do not appear to differ between experiments with individual halogens or when they are all mixed together. The effect of water increases the diffusion coefficients of F and Cl by no more than a factor of 3 compared to the anhydrous melt (D_F = 4.0 × 10⁻¹¹ to 1.6 × 10⁻¹⁰ m² s⁻¹; D_Cl = 3.0 × 10⁻¹¹ to 1.9 × 10⁻¹⁰ m² s⁻¹). Comparing our results to the diffusion coefficients of other volatiles in nominally dry basaltic melts, halogen diffusivities are about one order of magnitude lower than H₂O, similar to CO₂, and a factor of ∼5 higher than S. The contrasting volatile diffusivities may affect the variable extent of volatile degassing upon melt depressurization and vesiculation, and can help our understanding of the compositions of rapidly grown magmatic bubbles.     

Directed blasts and blast-generated pyroclastic density currents: a comparison of the Bezymianny 1956, Mount St Helens 1980, and Soufrière Hills,Montserrat 1997 eruptions and deposits

We compare eruptive dynamics, effects and deposits of the Bezymianny 1956 (BZ), Mount St Helens 1980 (MSH), and Soufrière Hills volcano, Montserrat 1997 (SHV) eruptions, the key events of which included powerful directed blasts. Each blast subsequently generated a high-energy stratified pyroclastic density current (PDC) with a high speed at onset. The blasts were triggered by rapid unloading of an extruding or intruding shallow magma body (lava dome and/or cryptodome) of andesitic or dacitic composition. The unloading was caused by sector failures of the volcanic edifices, with respective volumes for BZ, MSH, and SHV c. 0.5, 2.5, and 0.05 km³. The blasts devastated approximately elliptical areas, axial directions of which coincided with the directions of sector failures. We separate the transient directed blast phenomenon into three main parts, the burst phase, the collapse phase, and the PDC phase. In the burst phase the pressurized mixture is driven by initial kinetic energy and expands rapidly into the atmosphere, with much of the expansion having an initially lateral component. The erupted material fails to mix with sufficient air to form a buoyant column, but in the collapse phase, falls beyond the source as an inclined fountain, and thereafter generates a PDC moving parallel to the ground surface. It is possible for the burst phase to comprise an overpressured jet, which requires injection of momentum from an orifice; however some exploding sources may have different geometry and a jet is not necessarily formed. A major unresolved question is whether the preponderance of strong damage observed in the volcanic blasts should be attributed to shock waves within an overpressured jet, or alternatively to dynamic pressures and shocks within the energetic collapse and PDC phases. Internal shock structures related to unsteady flow and compressibility effects can occur in each phase. We withhold judgment about published shock models as a primary explanation for the damage sustained at MSH until modern 3D numerical modeling is accomplished, but argue that much of the damage observed in directed blasts can be reasonably interpreted to have been caused by high dynamic pressures and clast impact loading by an inclined collapsing fountain and stratified PDC. This view is reinforced by recent modeling cited for SHV. In distal and peripheral regions, solids concentration, maximum particle size, current speed, and dynamic pressure are diminished, resulting in lesser damage and enhanced influence by local topography on the PDC. Despite the different scales of the blasts (devastated areas were respectively 500, 600, and >10 km² for BZ, MSH, and SHV), and some complexity involving retrogressive slide blocks and clusters of explosions, their pyroclastic deposits demonstrate strong similarity. Juvenile material composes >50% of the deposits, implying for the blasts a dominantly magmatic mechanism although hydrothermal explosions also occurred. The character of the magma fragmented by explosions (highly viscous, phenocryst-rich, variable microlite content) determined the bimodal distributions of juvenile clast density and vesicularity. Thickness of the deposits fluctuates in proximal areas but in general decreases with distance from the crater, and laterally from the axial region. The proximal stratigraphy of the blast deposits comprises four layers named A, B, C, D from bottom to top. Layer A is represented by very poorly sorted debris with admixtures of vegetation and soil, with a strongly erosive ground contact; its appearance varies at different sites due to different ground conditions at the time of the blasts. The layer reflects intense turbulent boundary shear between the basal part of the energetic head of the PDC and the substrate. Layer B exhibits relatively well-sorted fines-depleted debris with some charred plant fragments; its deposition occurred by rapid suspension sedimentation in rapidly waning, high-concentration conditions. Layer C is mainly a poorly sorted massive layer enriched by fines with its uppermost part laminated, created by rapid sedimentation under moderate-concentration, weakly tractive conditions, with the uppermost laminated part reflecting a dilute depositional regime with grain-by-grain traction deposition. By analogy to laboratory experiments, mixing at the flow head of the PDC created a turbulent dilute wake above the body of a gravity current, with layer B deposited by the flow body and layer C by the wake. The uppermost layer D of fines and accretionary lapilli is an ash fallout deposit of the finest particles from the high-rising buoyant thermal plume derived from the sediment-depleted pyroclastic density current. The strong similarity among these eruptions and their deposits suggests that these cases represent similar source, transport and depositional phenomena.     

The first known natural occurrence of calcium monoaluminate,in a calcium‐aluminum‐rich inclusion from the CH chondrite Northwest Africa 470

Abstract— Natural calcium monoaluminate, CaAl₂O₄, has been found in a grossite‐rich calcium‐aluminum‐rich inclusion (CAI) from the CH chondrite Northwest Africa 470. The calcium monoaluminate occurs as colorless ～10 μm subhedral grains intergrown with grossite, perovskite, and melilite. Nebular condensation is the most likely origin for the precursor materials of this CAI, but calculations suggest that dust/gas ratios substantially enhanced over solar are required to stabilize CaAl₂O₄.     

The decline of Daphnia hyalina galeata in Lago Maggiore: a comparison of the population dynamics before and after oligotrophication

We reconstruct the impact of different environmental cues on Daphnia seasonal dynamics by means of an analysis of demographic and reproductive parameters, as well as of the size structure of the population. Data from 1996, indicative of the most recent productivity of the lake, with those from 1973, when the lake was meso-eutrophic, allow a discussion of the relevance of the observed changes for the structure of the pelagic food web of Lago Maggiore. Daphnia summer dynamics is mainly controlled by Bythotrephes longimanus. This is quite a different situation from that of the past, when Leptodora kindtii was the prevalent predatory cladocera. The size structure of Daphnia population revealed a depletion of small ovigerous females with increases in the predator. Our data allow a discussion of the idea, recently proposed, of Bythotrephes longimanus as a visual sit- and -wait predator.     

Composition and origin of holotype Al‐Cu‐Zn minerals in relation to quasicrystals in the Khatyrka meteorite

We investigated the khatyrkite–cupalite holotype sample, 1.2 × 0.5 mm across. It consists of khatyrkite (Cu,Zn)Al₂, cupalite (Cu,Zn)Al, and interstitial material with approximate composition (Zn,Cu)Al₃. All mineral phases of the holotype sample contain Zn and lack Fe that distinguishes them from khatyrkite and cupalite in the Khatyrka meteorite particles (Bindi et al. 2009 , 2011 , 2012 , 2015 ; MacPherson et al. 2013 ; Hollister et al. 2014 ). Neither highly fractionated natural systems nor geo‐ or cosmochemical processes capable of forming the holotype sample are known so far. The bulk chemistry and thermal history of khatyrkite–cupalite assemblage in the holotype sample hint for its possible industrial origin. Likewise, the aluminides in the Khatyrka meteorite particles may also be derived from industrial materials and mixed with extraterrestrial matter during gold prospecting in the Listvenitovy Stream valley.     

Spectroscopic and photometric observations of symbiotic nova PU Vul during 2009–2016

A new set of low-resolution spectral and UBVJHKL-photometric observations of the symbiotic nova PU Vul is presented. The binary has been evolving after its symbiotic nova outburst in 1977 and now it is in the nebular stage. It is found that the third orbital cycle(after 1977) was characterized by great changes in associated light curves. Now, PU Vul exhibits a sine-wave shape in all the light curves(with an amplitude in the U band of about 0.7 mag), which is typical for symbiotic stars in the quiescent state. Brightness variability due to pulsations of the cool component is now clearly visible in the VRI light curves. The amplitude of the pulsations increases from 0.5 mag in the V band to 0.8 mag in the I band. These two types of variability, as well as a very slow change in the physical parameters of the hot component due to evolution after the outburst of 1977, influence the spectral energy distribution(SED)of the system. The variability of emission lines is highly complex. Only hydrogen line fluxes vary with orbital phase. An important feature of the third orbital cycle is the first emergence of the OVI, 6828  Raman scattering line. We determine the temperature of the hot component by means of the Zanstra method applied to the He II, 4686  line. Our estimate is about 150 000 K for the spectrum obtained near orbital maximum in 2014. The VO spectral index derived near pulsation minimum corresponds to M6 spectral class for the cool component of PU Vul.